F10- Usb Port Mode Page-14; F11- Reverb Page-14 - GEM Prp700 Owner's Manual

owners manual
F8- Start Up mode
With this menu you can decide if the default start set up of the piano will be factory set or user set.
Press the Functions
button
F9- Midi dump
This function allows you to save to an external MIDI sequencer the song data recorded by you in
the piano.
Press the Functions
button
F10- USB port mode
This menu sets the piano USB port mode: Pc1, Pc2.
Press the Select F10 using the
Functions button SELECT/TEMPO buttons
F11- Reverb
This menu allows you to edit the different reverb type parameters.
Press the
Select F11 using the
functions
SELECT/TEMPO buttons
button
The functions Press again
button fl ashes
Page14
Select F8 using the
SELECT/TEMPO buttons
Select F9 using the Pressing the DATA + button the Midi data bulk will start. The display will
SELECT/TEMPO buttons
The function
button fl ashes
DEPTH
TIME
PREDELAY
BALANCE
DATA
Pressing the DATA button the display shows the
current value (FACTORY by default).
BALANCE
DATA
show a countdown until the data transmission is over.
BALANCE
DATA
Pressing the DATA + button the display shows
the current value (PC2 by default).
ROOM
The display shows the
Press again current effect selected for
editing (ROOM by default)
VALUE RANGE
Edit parameter
Select the
value using
parameter to edit
using the SELECT the DATA +/-
buttons
Prp700-Prp800
Change the start up
mode using the DATA
Change mode
using the DATA +/-
HALL 1
HALL 2
STAGE
BALANCE
DATA
Select reverb type using
the SELECT buttons
buttons
buttons.
buttons.