Metronome Parameters Editing Page-8; Metronome: Playing With A Metronome Guide - GEM Prp700 Owner's Manual

owners manual

METRONOME: playing with a metronome guide

Press the METRONOME button on the panel to en-
able the metronome click. The led of the button will
be turned on and the display will show the default
metronome (120 BPM), in a range from 20 to 240
BPM.
Press again the METRONOME button to switch off
the metronome click.
Metronome parameters editing
By depressing the METRONOME button pressed for more than 2 sec. the piano will enter the met-
ronome parameters editing menu. The display shows the fi rst parameter: TIME SIGNATURE. Select
the BALANCE/DATA button to set the time metrical subdivision you need.
Press again the SELECT/TEMPO button to select the next parameter: ACCENT. Enable/disable the
metronome accent by pressing the BALANCE/DATA buttons.
Press again the SELECT/TEMPO button to select the next parameter: metronome VOLUME. The
metronome volume can be set in a range from 0 to 127.
Failing to select any button for about 5 sec. will signal the piano to automatically exit the edit
menu.
Page8
The led blink in sync with
the metronome
Press the SELECT/TEMPO buttons to change the
current beat value.
Decrease Increase
value value
BALANCE
DATA
4/4 default value
BALANCE
DATA
Decrease Increase
BALANCE
value value
DATA
Prp700-Prp800
ETC.
Selectable values
Display
2-4
3-4
4-4
5-4
6-4
7-4
3-8
6-8
9-8
128
2-2
3-2
4-2
Default volume value
ETC.
Sign.
2/4
3/4
4/4
5/4
6/4
7/4
3/8
6/8
9/8
12/8
2/2
3/2
4/2