The Piano Song Library Page-11; Song Selection Page-11; Tempo Speed Editing In A Song From The Library Page-11; Marker Loop Play Mode Page-11 - GEM Prp700 Owner's Manual

owners manual
The piano song library
The piano sequencer featuring an internal piano library containing 50 popular piano songs is a
useful learning and training tool.
Song selection
By pressing the LIBRARY button on the panel, the
piano will enter into the library mode.
The LIBRARY button led will be illuminated and
the display will show the song library #1. Press
the PLAY button to start this song.
NOTE: The entire song library is listed at the end of this
manual. A piano score book is also included with the
instrument with our compliments!
Selecting a song from the library using the piano keyboard
The piano keyboard can be used to select any of the internal library songs, instead of using the
selection buttons. Press the LIBRARY button to enter in the library mode. Press a key on the keyboard
to start song.
NOTE: please refer to the complete library song title list at the end of this owner's manual.
Muting music part in a song from the library
Each of the songs in the library has been accurately performed separating the music parts played
by the left and the right hands. In this way you can study each piece in a very accurate and effective
way. Note that playing any of these songs the TRACK buttons leds are ON, this means that both
tracks are employed.
Tempo speed editing in a song from the library
While playing a song from the library it is possible to enable the metronome and to adjust its speed. This
may assist you to analyze and study any piece of music at a tempo that you are comfortable with
Enable library
Marker Loop play mode
During the song playback it is possible to set "on the fl y" two marker points (A and B). The sequencer will
automatically loop between these two points. Press the STOP button two times to exit the loop mode.
MARKER "A" setting:
Press the DATA - button
keeping the PLAY button
pressed
The marker loop mode works also with a user song recorded in the sequencer.
Press BALANCE DATA buttons to select another
song. The display shows the song number you
have selected.
Once a song has been selected press PLAY to execute.
Play a song Enable metronome
BALANCE
DATA
MARKER "A"
BALANCE
DATA
LEFT HAND disabling: press the
TRACK 1 button, the led goes OFF
Adjust tempo speed
MARKER "B" setting:
Press the DATA + button
keeping the PLAY button
pressed
Prp700-Prp800
RIGHT HAND disabling: press the
TRACK 2 button, the led goes OFF
BALANCE
DATA
MARKER "B"
Page11