Sharp AR-M160 Service Manual page 49

Program
Program name
Layout in 2 IN 1 copy* 2
Layout in 4 IN 1 copy* 2
Offset of paper output tray
Image rotation in duplex
3
copying*
2, 3
Location of the margin* *
Margin width* 2
Resolution in Auto/Text
mode
Memory allocated to
2
printer mode*
Key auto repeat
Key press time
Audible signals volume
Base setting beep signal
Number of copies limit
*2 On models with a dual function board.
*3 On models with automatic two-sided copying.
No
Use this setting to select the layout pattern when two original pages
are copied onto a single sheet of paper.
2 IN 1 copy
17
Pattern 1
Use this setting to select the layout pattern when four original pages
are copied onto a single sheet of paper.
4 IN 1 copy
18
Pattern 1 Pattern 2
When enabled, this function offsets the position in the output tray of
19
interrupt copy jobs and sets of copies during sort/group copy.
When a one-sided portrait original is placed in a horizontal
orientation (8-1/2" x 11" or 8-1/2" x 14" size) for two-sided copying,
20
the top and bottom of the images on the front and back of the paper
will be opposite to each other,
Use this setting to switch between the margin at the top edge and
21
the margin at the left edge.
Use this setting to set the margin width.
22
The copy resolution in auto and text mode is normally 300 dpi.
23 If high-quality copies are preferred, use this setting to change the
resolution to 600 dpi.
Use this to change the proportion of IMC memory used for printer
mode.
24
Use this setting to select whether or not holding down a key causes
repeated input of the key. For keys that normally cause a set value to
25 increase when held down (for example, holding down the [ZOOM]
key ( , )), this program can be used to have the set value not
change when the key is held down.
Use this setting to select how long a key must be pressed for the
input to be accepted. By selecting a longer time, you can prevent
settings from being changed by the accidental pressing of a key.
26
This sets the volume of beep signals.
27
Use this to sound a beep when a base setting is selected.
28
Use this setting to select 99 or 999 for the maximum number of
29
copies.
AR-M205 USER PROGRAMS 8-2
Description
Pattern 2
Pattern 3 Pattern 4
Default Parameters
1 (Pattern 1)
2 (Pattern 2)
Pattern 1
1 (Pattern 1)
2 (Pattern 2)
3 (Pattern 3)
4 (Pattern 4)
Pattern 1
0 (OFF)
ON
1 (ON)
0 (OFF)
1 (ON)
OFF
1 (Left edge)
Left edge
2 (Top edge)
1 (0" (0mm))
2 (1/4" (5mm))
1/2" (10mm) 3 (1/2" (10mm))
4 (3/4" (15mm))
5 (1" (20mm))
1 (300dpi)
300dpi
2 (600dpi)
1 (30%)
2 (40%)
50% 3 (50%)
4 (60%)
5 (70%)
0 (OFF)
1 (ON)
ON
1 (Minimum
(current response speed))
Minimum
2 (0.5sec)
(current
response 3 (1.0sec)
speed)
4 (1.5sec)
5 (2.0sec)
1 (Low (current volume))
Low
(current 2 (High)
volume)
3 (OFF)
0 (OFF)
OFF
1 (ON)
1 (99 copies)
999 copies
2 (999 copies)