Adjustments And Checks; Alignment Instructions; Adjustment Point - Teac PL-D2000 Service Manual

3 ADJUSTMENTS AND CHECKS

ALIGNMENT INSTRUCTIONS

EQUIPMENT NEEDED:
AM Signal Generator
FM Signal Generator
Oscilloscope
VTVM(AC, DC)
Test loop antenna (AW Adjustment)
Dummy antenna (FM Adjustment)
Stereo signal modulator
Frequency counter
Distortion analyser
IMPORTANT
1. Check power-source voltage.
2. Set the function switch to band aligned.
3. Keep the signal input as low as possible to adjust accurately.
4. Modulation and modulation frequency.
Item
Modulation Modulation frequency
Band
AM 30% 400Hz
FM 30%(22.5kHz Dev.) 1kHz

ADJUSTMENT POINT

5