Safety Information; Table Of Contents - Teac PL-D2000 Service Manual

CONTENTS

1 SAFETY INFORMATION

2 SPECIFICATIONS
3 ADJUSTMENT AND CHECKS
4 EXPLODED VIEWS AND PARTS LIST
5 PC BOARDS AND PARTS LIST
6 BLOCK DIAGRAM
7 WIRING DIAGRAM
1 SAFETY INFORMATION
This product has been designed and manufactured according to
FDA regulations "title 21, CFR, chapter 1, subchapter J, based on
the Radiation Control for Health and Safety Act of 1968", and is
2
classified as a class 1 laser product. There is no hazardous
invisible laser radiation during operation because invisible laser
3
radiation emitted inside of this product is completely confined in
the protective housings.
5
The label required in this regulation is shown 1.
8
OCAUTION
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF
15
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
23
24
Optical pickup:
Type
Manufacturer : Hitachi Media Electronics Co., Ltd.
Laser output : Less than 0.5 mW on the objective lens
Wavelength
2
1
For U.S.A.
: HOP-1000
: 770 - 810 nm (CD), 635 - 665 nm (DVD)