Adjustment And Checks - Teac PL-D2000 Service Manual

3 ADJUSTMENTS AND CHECKS
TCHR
w ALIGNMENT INSTRUCTIONS
EQUIPMENT NEEDED:
AM Signal Generator
FM Signal Generator
Oscilloscope
VTVMIAG, OC)
Test loop antenna (AW Adjustment)
Dummy antenna (FM Adjustment)
Stereo signal modulator
Frequency counter
Distortion analyser
IMPORTANT
1. Check power-source voltage.
2. Set the function switch to band aligned.
3. Keep the signal input as low as possible to adjust accurately.
4, Modulation and modulation frequency.
Modulation Modulation frequency
30% 400Hz
L104
e102 FEOO] ?
TC103