Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Gel Frame
Holder
Page 8 of 19
Before mounting the product, read and follow the safety recommendations indicated in
the
Safety
Notes.
The SlimPAR PRO Q USB may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support
the product's weight. See the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
·
When power linking multiple products, mount the products close enough for power
linking cables to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Safety Cable
(such as CH-05 from
Chauvet)
The SlimPAR PRO Q USB comes with a gel frame and a gel frame holder, which can be
attached with the included screws. The gel frame holder can easily fit 7.5 inch barn
doors, such as the Ovation 7.5" Barndoor from CHAUVET Professional.
Gel Frame
or
7.5" Barn doors
Technical Specifications
for weight information.
Mounting Clamp
(such as the CLP-15N from
Chauvet)
Bracketed Yoke
SlimPAR PRO Q USB User Manual Rev. 3
Double-
Bracket Adjustment
Knob x 2
Advertisement
Table of Contents
