Multi Channel Stereo Playback; Virtual Playback; Stereo Playback; Direct Playback - Denon DHT-391XP Owner's Manual

Multi channel stereo playback

This mode is for enjoying stereo sound from all speakers.
Playing the source (vpage 17
1
– 20).
Press 0 or
2 SURROUND
1 to select "MULTI
SURROUND
CH STEREO".
Multi channel stereo playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select multi channel stereo mode.

Virtual playback

This mode is for enjoying surround effects using only the front
speakers or headphones.
Playing the source (vpage 17
1
– 20).
2 Press 0 or
SURROUND
SURROUND 1 to select
"VIRTUAL".
Virtual playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select virtual mode.

Stereo playback

This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
Playing the source (vpage 17
1
– 20).
2 Press 0 or
SURROUND
SURROUND 1 to select
"STEREO".
Stereo playback begins.

Direct playback

Sound recorded in source is played as is.
• Surround back signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (vpage 36) • RESTORER (vpage 36)
1 Playing the source (vpage 17
– 20).
2 Press 0 or
SURROUND
1 to select
SURROUND
"DIRECT".
Direct playback begins.
ENGLISH
23