Toshiba Tecra S3 User Manual page 161

5. Slide your fingernail or a thin object under the cover and lift it off.
6. Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot at about a 45 degree angle before
pressing it down until the latches on either side snap into place.
Align the grooves along the edges of the memory module with the locking
tabs on the connector and insert the module into the connector firmly. If
you find it difficult to install the memory module, gently prize the locking
tabs outwards using the tip of your finger. Ensure that you hold the memory
module along its left and right hand edges - the edges with the grooves in.
■
Never allow metal objects, such as screws, staples and paper clips,
to enter the PC or keyboard. Foreign metal objects can create a short
circuit, which can cause PC damage and fire, possibly resulting in
serious injury.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
User's Manual
Memory module cover
Removing the memory module cover
Slot B
Seating the memory module
Optional Devices
Screw
Slot A
8-9