Using The Hard Disk Drive (Hdd) Protection - Toshiba Tecra S3 User Manual

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on hard disk
drive.
Using the acceleration sensor built in the computer, HDD Protection detects
vibration, shocks, and those signs in the computer, and automatically
moves the HDD (Hard Disk Drive) head to the safe position to reduce the
risk of damage that could be caused to the disk by head-to-disk contact.
■
This function does not guarantee that the hard disk drive will not be
damaged.
■
A secondary hard disk drive fitted to the computer is not supported by
the HDD protection function.
When vibration is detected, the following message is displayed, and the
icon in the notification area of the taskbar is changed to the protection
state. This message is displayed until the OK button is pressed or
30 seconds pass. When vibration subsides, the icon returns to the normal
state.
Taskbar Icon
State
Normal
Protection
OFF
User's Manual
HDD Protection Message
Icon Description
HDD Protection is enabled.
HDD Protection is active. The hard disk drive
head is in a safe position.
HDD Protection is disabled.
Operating Basics
4-43