Oki B710 User Manual page 101

Symptom Explanation
"Waiting" Printer is waiting for
is data from the host
displayed computer and is in the
but midst of a job.
nothing is Sometimes a job is sent
being without normal job
printed. termination characters.
Printing is The receive buffer is
taking up a insufficient.
lot of time.
Is the printer driver set
to [1200dpi] on the
[Graphics] tab?
Printing with TrueType
fonts may take up
printing time.
Top section Are the paper tray
of printed guides set in the correct
document positions?
is missing.
Text is
reduced.
B710 B720 B730 User's Guide > 101
Action
Press and hold <On Line> for
3 seconds until the printer
flushes the job buffers and
completes the printing of this
job.
Alternatively, you can simply
wait for a timeout to occur
which will automatically flush
the buffers and complete the
printing of the job. This default
timeout is normally 20 seconds
and can be adjusted with a
control panel command
When printing documents of
high resolution, reduce the
memory capacity of items not
in use.
It is recommended to disable
ports not in use, and channel
the memory to other
purposes.
Changing the setting to
[600dpi] will shorten the print
time.
See the Online Help for the
printer driver.
Change the printing method
for TrueType fonts in [Specify
Font] on the [Detailed
Settings] tab of the printer
driver.
See the Online Help for the
printer driver.
Set the length guide and the
right width guide in the correct
positions.
See page 22.