CHAPTER 2 INSTALLATION AND BASIC OPERATION
5.
CONTROL PANEL OPERATION
There are four Light Emitting Diodes (LEDs) (Toner, Drum, Paper, Ready) and a control
panel button (Go) on the control panel.
5.1
Control Panel Button & LED Functions (Printer Status)
5.1.1
Control panel button
Go button: Cancel printing, Wake-up, Form feed, Error recovery and Reprint.
5.1.2
LEDs
1)
Toner LED (Yellow) indicates when the toner is low or empty.
2)
Drum LED (Yellow) indicates when the drum is nearing end of life.
3)
Paper LED (Red) indicates when an error occurs, such as cover open or paper jam.
4)
Ready LED (Green) indicates when the printer is ready or if data is remaining.
NOTE:
When the power switch is off or the printer is in Sleep mode, all LEDs are off.
Fig. 2-21
LED is off
LED is on
LED is blinking
2-22
Confidential