Brother HL-2030 Service Manual page 164

Setting the starter toner cartridge
The "Toner Life End" message is displayed according to the upper limit value of the
developing roller rotation. The upper limit value is different between the starter toner
cartridge and standard one. Therefore, it is necessary to set the conformable value to the
toner cartridge installed in the printer following the steps below.
1) Select 'Set Starter count' or 'Set Standard count' from Menu according as the currently
used toner cartridge.
Fig. 6-4
2) Check ON in the check box at the right hand side.
NOTE:
It is impossible to set both types of the toner cartridge. If selecting both, the NG message is
displayed.
3) Click the OK button in the end. All of the settings are completed.
4) Turn the power supply of the printer off.
6-5
HL-2030/2040/2070N SERVICE MANUAL
Fig. 6-5
Confidential