Wiring Connection; Part List For Installation - Kenwood KDC-X597 Instruction Manual

Wiring connection

KDC - BT355U
R
MIC (Microphone input
terminal) (➜ 10)
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or
chassis of the car
Battery
KENWOOD STEREOS
KDC - X597
KDC - BT555U
L
Front output
Rear/subwoofer output
Fuse (10 A)
KDC - X597
To the optional SiriusXM Connect Vehicle Tuner (commercially available) (➜ 8)
White
Light blue/yellow
White/Black
(Steering remote control
wire)
Gray
Gray/Black
Green
Blue/White
Green/Black
(Power control wire)
Purple
Purple/Black
Brown
(Mute control wire)
Red
(Ignition wire)
Blue
Yellow
(Battery wire)
Subwoofer output
Front output
R L
Rear output
KDC - BT555U
/ :
If no connections are made, do not let the wire come out from the tab.
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
To the power control terminal when using the
optional power amplifier, or to the antenna control
P. CONT
terminal in the vehicle.
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, refer your
MUTE
navigation manual.)
(Not used)
ANT CONT

Part list for installation

A Faceplate
( ×1 )
B Mounting sleeve
( ×1 )
C Trim plate
( ×1 )
D Wiring harness
( ×1 )
E Extraction key
( ×2 )
F Flat head screw
( ×4 )
G Round head screw
( ×4 )
CAR STEREOS