Hauppauge WinTV-HVR-Series Reference Manual page 28

N ote: The WinTV remove will only work when the WinTV application is the active
application, press the RED button to make it the active application.
Remote Control Buttons during a Recording
N ote: Most WinTV functions and remote buttons are disabled when recording
Record button: Set the duration of the recording, by steps of 15 minutes up to 2 hours, then
by steps of 30 minutes up to 4 hours (like the OTR button). Clicking again will disable recor-
ding duration. This information is displayed in the PVR tray.
Stop button: Stop recording and close the PVR tray (as the Back/Exit button)
Pause button: Freeze the video. Press the Play or Pause button again to un-freeze the video.
The Pause button has no effect on the recording itself. While the video is frozen, the recor-
ding is continued in the background, there is no Rewind, Forward, Skip, Replay function.
Remote Control Buttons when Pausing TV or Playing a Video
N ote: You cannot change channels when Pausing TV
Record button: Stop current action and start a recording
Stop button: Stop playing or Exit pause mode and close the PVR tray (as the Back/Exit button)
Play button: Play the recorded TV or TV from the pause buffer (if PVR tray opened). Play and
Pause button have alternatively the same function.
<< (Rewind): Play backwards at 8x speed. Clicking again will play paused TV or recorded TV
at 1x
>> (Forward): Play forward at 2x speed. Clicking again will play forward at 8x, then back to
1x
Pause button: Start Pause-Mode (TimeShift). Press Play or Pause again to continue watching
from where you left off
>I (Skip): Skips ahead in the Pause buffer by 10 seconds per click. Holding the Skip button
will auto-repeat, and advances the video about 10 minutes per 15 seconds the button is
depressed
I< (Replay): Skips backward in the Pause buffer by 10 seconds per click. Holding the Replay
button will auto-repeat, and advances the video about 10 minutes per 15 seconds the button
is depressed Quick Jump 0 to 9 buttons: When playing a video, you can quickly skip through
the video by pressing the 0-9 buttons. When you press one of these buttons, you will skip to,
for example, 10% of the video file when you press '1', 20% of the video file when you press
'2' and so forth (% of the length of the file).
During Pause-Mode, any key skips ahead in the Pause buffer to -2 seconds.
WinTV Reference Manual
25