Hauppauge WinTV-HVR-Series Reference Manual page 10

WinTV Reference Manual
Search for DVB-S channels
N
ote: This section refers to products with DVB-S tuner (WinTV-NOVA-S series and
WinTV-HVR-3000).
LNB - Configuration and Channel search
Click on the Button MENU and "Suite-Manager" to open the channel manager. Select the
<sources> and highlight the <DVB-S> source.
LNB - Configuration
To configure the LNB satellite positions left click on the <LNB> configuration.
The "LNB" (Low Noise block) is located on the head of the SAT antenna. "DiSEqC" is a stan-
dard for the control of several LNBs over a multi-switch. Select the DiSEqC option that suits
your SAT Dish installation and configuration. The control of up to four LNBs is supported.
No DiSEqC
Select this option if your satellite cable is connected directly to 1 LNB, where only 1 orbital
satellite position can be received. Click the small box before LNB_1 so that it is ticked for use.
Simple DiSEqC
Select this option if your satellite cable is connected to a shift box with "Tone Burst" control
(also called "Mini-DiSEqC". You have the option to select between 2 satellite positions. Click
the small box before LNB_1 so that it is ticked for use.
7