Hauppauge WINTV-HVR-1400 QI Quick Installation Manual

WinTV-HVR-1400
Quick Installation Guide
©Hauppauge Computer Works, Inc. 2007 · QI-WINTV-HVR-EXT-V1.0-ENG · 2007/10/25
Hauppauge Computer Works, Ltd. Tech Support: (+44) 0207 378 0202
Telephone: (+44) 0207 378 1997
10 Borough High Street
Bank Chambers Fax: (+44) 0207 357 9171
support@hauppauge.co.uk
London, UK, SE1 9QQ
www.hauppauge.co.uk
Contents of this WinTV-HVR-1400 package
● WinTV-HVR-1400 Hybrid ExpressCard/54
● Audio/Video input cable
● Portable TV antenna
(on some models)
● IEC to MCX Aerial Adapter Cable
● WinTV-Installation CD-RO including:
· WinTV application with SoftPVR™
· WinTV-Scheduler
· 7 Day EPG
· VTPlus
● This installation guide
Page 1
4. WinTV ® Application
To start the WinTV application double click on the WinTV icon.
When you run WinTV for the first
time, a message will appear ask-
ing you to scan for tuner chan-
nels now; please ensure that the
TV antenna is connected, click
YES.
Select your country location, for instance, select United Kingdom and
then, select Scan.
The scanning process will start by scanning the analogue frequencies
for channels, if any are found they will be added to the channel list.
The scanning process for DVB-T will then scan for channels. When a
DVB-T channel is found, the Signal Status will show a quality level
and the locked box will be checked. The DVB-T digital channels that
are found will appear in the channel listing box.
N ote: If you have attached an antenna and do not receive any
digital TV channels, either use a stronger antenna (a roof top
antenna is recommended for best reception) or try to add a TV
channel manually (see trouble shooting section).
Click Close when finished.
Page 5
Pause, Record and Playback TV
There are four buttons to control the watching, recording, pausing and
playback of TV. Clicking on the Pause button will cause the Pause
menu to roll down from the WinTV application, while clicking on
either the Record or Playback button will cause the Record menu to
roll down. Click the TV button will close the roll down menus to close
and for live TV to be displayed in the WinTV video window.
Record and Playback
TV Mode One Touch Pause One Touch Record
The Pause button prepares the WinTV pausing live video.
The Record button will start a record session. If you click Record but-
ton more than once, a record timer will be set and the recording will
be done for 15 minutes for each time the Record button is clicked.
For example, if you click the button 3 times, the WinTV will record for
30 minutes.
Pause mode
The pause mode allow you to pause the Live TV picture and allows
you to use the TimeShift function to rewind and fast forward the TV.
Clicking the Pause button on the WinTV application starts the Pause
mode. The Pause Menu will drop down.
TV-Mode Pause Record
Time counter
Video-position Fast rewind Pause Play Fast forward
Slow motion
Pause Buffer
The Pause buffer is space on your hard disk where video is stored
during the Pause mode. The maximum amount of time which your TV
program can be delayed is dependent upon how much storage space
you have set for the Pause buffer.
Clicking the Pause button will start recording into WinTV's Replay
Buffer. It takes about 10 seconds for the Replay Buffer to be initialized
and for Pause to become effective.
Unclicking the Pause button will cause the audio/video program to
start playing from the point where the button was originally pushed.
Page 9
1. Installing the WinTV-HVR-1400
1. Locate a free ExpressCard/54 (54mm width) slot.
2. Turn on your PC and wait until Windows has completely started.
3. With the label facing up, insert the WinTV-HVR-1400 into the
ExpressCard/54 slot.
2. Connecting the Aerial and A/V input cable
Plug your TV antenna or RF output from your cable/satellite box into the
WinTV's TV Connector.
Plug the IEC to MCX cable into
You can also connect sources via
the WinTV's TV MCX Connector
the A/V input cable as describe
here.
It is recommended to connect to
a roof top aerial as this may pro-
vide a better signal quality then
the provided portable antenna (if
supplied). You will need to ensure
that you are located in a area that
has Digital Terrestrial coverage.
Plug your roof top
aerial or portable TV
Please visit www.dtg.org.uk/retail-
antenna into the IEC
er/coverage.html to MCX cable.
Sweden: www.pts.se
Denmark: www.digi-tv.dk
Finland: www.digitv.fi
Poland: www.emitel.pl
N ote: If you do not receive channels using the portable anten-
na, try connecting a rooftop aerial to the device and scan
again, if channels are now received there may be an issue with sig-
nal strength/quality in your area you may not be able to use the
small antenna.
Page 2
Using a external source
If you are using a external source like a Hi-8 Camcorder, Video
recorder etc, then you will need to connect via the S-
Video/Composite for the Video picture and Line-Input for the sound.
N ote: Unless stated most VCR's and STB's only output in com-
posite via SCART', a scart to S-Video lead, in most cases, will
not work correctly and will only yield a black and white picture.
If you are using a Scart to composite (RCA Yellow phono) lead, please
ensure that the signal is being sent in the correct direction from the
Scart lead to the phono connection.
Configuring a external source in WinTV
In the WinTV application click on Menu then Suite Manager, then click
on the Sources tab. To add the S-Video or Composite channel select
the option on the left and then select the Video Format from the drop
down list.
N ote: PAL BGHIDK is the commonly used format in Europe.
Type in a channel "Name" e.g. Video and a Description and then click
on "Save" the channel will now be added and if you click on Close
you will be returned back to the main TV viewing window.
Page 6
Most WinTV functions are active while in the Pause or Pause Live
mode. For example, you can change volume, resize the TV window,
go into "no-title mode", etc.
While in Pause mode, the Video Position bar shows the amount of the
Replay Buffer which is filled with video. For example, if the Video
Position indicator shows halfway, it means that half of the Replay
Buffer is filled. If you find you cannot Pause as many minutes as you
would like, increase the size of the Replay Buffer.
While in Pause mode, the A/V stream is always saved in the Replay
Buffer. To stop saving the A/V stream in the Replay Buffer, you must
exit the Pause mode by clicking TV mode.
Replay
While in the Pause mode, hitting the Replay button acts like the
Instant Replay you see on TV broadcast sporting events: the
audio/video goes back in time and you repeat what you have previ-
ously seen. Each click of the Replay button causes audio/video to go
back 10 seconds. For example, if you want to repeat the audio/video
you saw 10 seconds ago, you would click the Replay button once. If
you want to see the video you saw one minute ago, you would need
to click the Replay button six times.
For extended replay times, you might find it more convenient to grab
the Video Position indicator control bar and move it to the left. Once
you let the control bar go, audio/video starts to play (it might take a
few seconds for the WinTV application to start playing).
You might have to move the Video Position indicator to the left and
right to find the desired spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded
in the Replay Buffer. Therefore, if you have clicked the Replay button 3
times (so that you are replaying the audio/video seen 30 seconds
ago), the video you see in the WinTV window will be 30 seconds
Skip forward 10 sec
behind the live program.
Fast forward
Skip Ahead
Clicking the Skip button will skip the video ahead 10 seconds.
Rewind
Clicking the Rewind button while playing video will rewind the
recorded video. Clicking the Rewind button again will continue the
playing.
Slow Motion
Clicking the Slow Motion button while playing video will play in
Slow Motion. Clicking the Slow Motion button again, will continue
playing normally.
Fast Forward
Page 10
3. Install the WinTV Drivers and Applications
N ote: If you have any anti-virus software enabled, please dis-
able it during the installation of the software.
When you attach the WinTV-HVR-
1400, the Found New Hardware
Wizard will appear, Click on
Cancel.
Plug the A/V
Insert your WinTV Installation
cable into the
WinTV's AV-In CD-ROM, the installation window
Connector
will automatically appear.
N
ote: If the autorun does
not start, browse to the
files on the disc and double
click on the file called 'Setup'.
Connect your (audio) Connect your (video)
source using the
source using either
In the installation window click on
white and red RCA the yellow RCA
Step 1: Install WinTV Drivers.
connectors. Composite or S-Video
connectors.
A blue screen will open which will
begin installing and updating the
drivers for your product.
Once complete, a message
appears in the bar. If this message
is Drivers have been updated
Successfully, click on the bar to
exit. If the message reports an
error, check the connection of
your WinTV, or contact our tech-
nical support.
Watch TV
Full screen
Volume
Always on Top
Mute
Setup Menu
CFG
Configure Snapshot
Snapshot viewer win-
Snapshot Still
dow:
capture
Double click on each
thumbnail to see
image full size.Click
and hold your right
mouse button to see
image options.
Changing channels
You can change channels by using the Channel Up or Channel Down
buttons on the WinTV. You can type a channel number (for example:
27) and WinTV will tune to that channel. If the entered channel does
not exist, you will see a black window.
You can also right click in the Current TV channel box, where you will
see a list of channels. Or type letters (for example: BBC) to access to
the list of the channels including these letters.
TV Mode
When you click the Full screen TV button, TV will appear full
screen on your PC monitor. When finished watching TV full screen,
click your right mouse button in the TV window. If you see video with
a black box around it, click the Pref button then click TV mode tab.
Check the box which says "Allow resolution change".
"Always on top" Mode
The WinTV application will remain in view over any other applica-
tions even if it is not selected. To turn on, click the Always on top but-
ton. It will turn green. To turn off, click this button again.
A convenient way to use Always-on-top is to make the TV window in
the no-title mode small, and to make the TV window in the title mode
larger. Then you can switch from a small window to a larger one by
clicking the right mouse button.
Clicking the Fast Forward button one time will fast forward your video
at 2X speed. Clicking the Fast Forward button two times will fast for-
ward your video at 8X speed.
Record and Playback modes
Display Counter
Video-Position
Click the Playback button on the WinTV application to open the
Record and Playback control bar. Clicking the Record will automatical-
ly generate a file name and start recording your audio/video program.
If you click Record button more than once, a record timer will be set
and the recording will be done for 15 minutes for each time the
Record button is clicked. For example, if you click the button 3 times,
the WinTV will record for 30 minutes.
Functions:
● When recording TV, the record button will depressed
●
A time counter will be shown indicating the lenght of time of the
recording
If you click Stop the time counter will revert back to 00:00:00
The time is specified in a Hour:Minute:Second format.
Stop
Clicking the Stop button will stop the video you are recording or
playing back.
Play
Clicking the Play button will playback from disk the last video file
created. When playing a video, you can rewind, fast forward, replay
10 sec or skip forward 10 sec using the buttons on the control bar.
Pause
Clicking the Pause button while Playing will pause your
audio/video.
Rewind
Clicking the Rewind button will play the video file in reverse.
Clicking the Rewind button again will continue the playing of the video.
Next, click on Step 2: Install
WinTV and select your language
from the list. The setup window
should appear and begin to auto-
matically install the WinTV appli-
cations.
N ote: During the installati-
on, other installation
wizards may open, we recom-
mend following the instructions
in each of these and installing
with the default options availa-
ble.
N ote: For advanced users
you can select the 'Custom
Installation' which will allow
you to modify the list of appli-
cations that are installed by
default.
Once the WinTV installation is complete, click OK then Exit in the win-
dow "Hauppauge WinTV Installation CD". You should now be back at
your Windows desktop.
Page 3
Pref
Click the Pref button to open the preferences menu:
View: These are the settings for the On Screen Display of the TV
Minimise
channel and Audio Volume, where you can enable Close Captions (if
Channel up
supported in your system configuration), plus controls for the Toolbar
Remove toolbars
mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV
Channel down Close
no title mode
mode).
Channel surf
Movies: Here is where you configure some video and audio settings.
Click your right mouse button in the
Last channel You can set the movie record directory (DVCR Record File Path).
TV window to remove toolbars.
Click again to restore toolbars.
Snapshot: Set the size of your captured images, plus single or two
Freeze picture
field captures for capturing motion or still image video.
Audio: Your audio settings are configured here.
Current TV channel
Menu
Click your right mouse
button here to see the Click the Menu button to open the TV setup menu. Here is the main
channel selector
control bar for TV channels, and duplicate controls for other functions:
Suite-Manager: Configure the TV tuner (scanning, naming, channel
pre set, etc..) and setting up favourite channel lists.
Configuration: Duplicate configuration menus for colour, audio, etc.
Playback
View: For settings an exact TV window size: 320x240, 640x480 etc.
TV-Mode Pause Record
Page 7
Fast Forward
Clicking the Fast Foward button one time will fast foward your
video at 2X speed. Clicking the Fast Foward button two times will fast
foward your video at 8X speed. Clicking the button again will continue
playing back at normal speed.
Record
Slow Motion
Clicking the Slow Motion button during playback will cause the
video to play in slow motion (at 1/2 speed). Clicking the Slow Motion
button again will return the video to normal playback speed.
File
File button
Rewind Pause Stop Play Forward
Clicking the File button opens the File menu. The last file record-
Play forward slow
ed is listed in the File name box. In the File menu you can:
● Rename your recorded video file: To rename a video file, find the
file you would like to rename, highlight it with your mouse, and click
and hold the right mouse button. Go down to Rename and then you
can type in a new name. Remember: you must keep the MPG
extension on the file.
● Play a video file previously recorded: Find the file you would like to
play, highlight it with your mouse (one click of the mouse button)
and click Open. Then click the Play button.
● Delete recorded video files which you no longer want: Click your
right mouse button on the video file once, go down the menu and
click Delete.
Keyboard shortcuts
Sound up
Sound down- Page Down
Plus (+)
Minus (-)
Ctrl T
Ctrl P
Page 11
Page 4
Page 8
- Page Up Ctrl+M - Mute on/off
ALT+M - Re-size TV menu
- Chanel Up - Channel number
0-9
- Channel Down - Take a snapshot
Space bar
- Frame TV Ctrl F - Still image
- Frame print
Page 12