Sync Control/Line-Lock Setup - Honeywell HCS544 User Manual

Sync Control/Line-lock Setup

This screen allows you to synchronize the vertical interval
sync pulse of your camera with other equipment to reduce
the effect of picture roll on the monitor. Line lock mode is
only available when using 24 VAC power.
Figure 8
Menu Item
INTERNAL
LINELOCK
RETURN
Document 800-01123 Rev B
02/08
Sync Control Setup
<SYNC. CONTROL>
SYNC
Description
When line lock is not required.
Adjust the vertical phase (VPH):
VPH: 000–359 (factory default is 0)
Press ENTER (SET) to return to the SETUP menu.
INT (L/L)
17