Programming; Osd Menu Controls; Figure 4 - Honeywell HCS544 User Manual

Programming

Use the OSD (On-Screen Display) to program the camera.

OSD Menu Controls

Figure 4

ENTER
E N T E R
+
When no buttons are pressed, the menu display turns off
automatically after 70 seconds.
10
OSD Menu Control
Navigating through the menus
ENTER (SET)
Press to access the SETUP
MENU.
Press to enter a screen or
select a menu option.
! "
,
Move horizontally to and
between menus and options.
# $
,
Move vertically to and between
menus and options.
%
" " indicates submenus.
Select the menu, then press
ENTER.
Select RETURN, then press
ENTER, to return to the
previous menu.
Select EXIT, then press ENTER,
to save your changes. Settings
remain in effect when power is
turned off, then on again.