Sync Control Setup; Restore Factory Default Settings - Honeywell HCC484TP User Manual

Sync Control Setup

To synchronize the vertical interval sync pulse of your camera with
other equipment to reduce the effect of picture roll on the monitor.
Figure 14
Menu Item
INTERNAL
LINELOCK
RETURN

Restore Factory Default Settings

To reload the factory default settings on the camera.
Figure 15
Menu Item
RESTORE
RETURN
Rev 1.01
Sync Control Setup
<SYNC. CONTROL>
SYNC MODE:
RETURN
Description
When line lock is not required.
Adjust the proper phase:
V.PH: 000 – 300 (factory default is 0)
Press MENU to return to the SETUP MENU.
Restoring Default Settings
<RESTORE DEFAULT>
RESTORE FACTORY SETTING
RETURN
Description
Press MENU to Reload the factory default camera
settings.
This action replaces all user-defined settings.
Press MENU to return to the SETUP MENU.
AUTO
INTERNAL
16 900.0512
07/06