Remote Control Descriptions - Zenith D52WLCD Series Service Manual

REMOTE CONTROL DESCRIPTIONS

Remote Control Functions in TV Mode
Selects the remote operating
mode: TV, VCR, Cable, DVD
and Satellite. Select other oper-
ating modes, for the remote to
control external devices.
Selects the analog TV signal.
Toggles between Video 1 and
Video 2 input sources.
Switch the sound on or off
Changes to next lower PIP
Swap the signal from
your PIP window to
the main screen.
THUMBSTICK
Allows you to navigate the on-
screen menus and to adjust the
system settings and preferences,
by moving to an option with
and selecting the highlighted
option with . If is pressed while
you are in normal viewing, the
information banner is displayed.
Not functional
D52WLCD
REMOTE CONTROL
MODE
ANTENNA
VIDEO
MUTE
PIPCH-
channel
SWAP
D
F G
E
tv vcr cable dvd sat
mode light power
source
antenna video front
comp1 comp2 rgb
1 2 3
4 5 6
7 8 9
0
enter
mute ratio
vol ch
swap pipch- pipch+ pip
flashbk surf freeze
menu
exit
skip
record stop
pause rew
play ff
9
INDICATOR LIGHTS
Show active remote mode
every time any button is
pressed.
LIGHT
Illuminates the remote con-
trol keys.
FRONT
Selects the front video sig-
nal if a device, such as a
camcorder or game player,
is connected to the front
video input jack.
RATIO
Changes the screen format
or aspect ratio.
PIPCH+
Changes to next higher PIP
channel.
PIP
Toggles between PIP, POP
(Picture-out-of-Picture) and
Split screen.
SURF
Scrolls the Surf channel
list.
EXIT
Clears all on-screen dis-
plays and returns to TV
viewing from any menu.
OVERVIEW