Duplex Transport Assembly - Oki C7400 Maintenance Manual

2.3.45 Duplex Transport Assembly

(1) Turn over the duplex transport Assy.
(2) Unscrew the three screws
(3) Unplug the connector and detach the mold Assy
(4) Detach the two actuators
(5) Unscrew the screws
(6) Unhook the connector and disengage the two claws to detach PCB-MOP
(7) Unplug the cable and, warping the claw, detach the transport sensor.
(8) Unscrew the two screws to detach the cord duplex connector Assy.
(9) Unscrew the screw
(10) Unscrew the screw
(11) Unscrew the screw
(12) Detach the bush
(13) Unscrew the screw
(14) Detach the gear
(15) Detach the gear
becomes detached.
(16) Unscrew the screw
(17) Remove the E ring
earth becomes detached.
(18) Detach the gear
(19) Detach the gear
(20) Detach the bush
time, the earths
(21) Detach the idle roller shaft and the idle roller, then detach the idle roller springs (eight springs).
(22) Remove the cable of the duplex transport sensor Assy from the claw of the cover-upper.
Disengage the claw, then detach the sensor.
41316401TH Rev.9
and five screws
.
and to remove the earth
to remove the earth
to remove the earth
to remove the earth
, gear and bush , then detach the roller
to remove the earth
and bush . At the same time, the mini pitch belt
and bush , then detach the roller
to remove the earth
and three screws to detach the motor Assy
and bush .
, knock-pin and bush
, gear , knock-pin and bush
and become detached.
to detach the plate
.
.
.
.
.
.
.
. At the same time, the mini pitch belt
.
, then detach the roller
, then detach the roller
Oki Data CONFIDENTIAL
.
.
becomes detached.
. At the same time, the
.
. At the same
66 /