Control Panel Assy/ Control Panel Bezel/ Led Control Pwb/ Toner Sensors/Stacker Full Sensor/ Control Panel/ Control Panel Tape Harness/Eject Rollers - Oki C7400 Maintenance Manual

2.3.4 Control Panel Assy/ Control Panel Bezel/ LED Control PWB/ Toner Sensors/ Stacker Full Sensor/
Control Panel/ Control Panel Tape Harness/ Eject Rollers
(1) Detach the control panel bezel placed in the control panel Assy
(2) Remove the screw
(3) Detach the control panel tape harness
(4) Remove the top cover unit (see section 2.3.3).
(5) Unscrew the four screws
(6) Remove the two screws
(7) Remove the screw
(8) Disengage the four claws to demount the toner sensor
(9) Demount the stacker full sensor
(10) Demount the exit rollers
(11) Detach the LED harnesses, K, Y, M and C
(12) Detach the top cover inner frame Assy
Figure 2-3-4 Control Panel Assy/ Control Panel Bezel/ LED Control PWB/ Toner Sensors/ Stacker
Full Sensor/ Control Panel/ Control Panel Tape Harness/ Eject Rollers
41316401TH Rev.9
to demount the control panel Assy
.
to remove the earth plate
, unhook all the connectors
.
.
.
.
.
Oki Data CONFIDENTIAL
.
.
.
and demount the LED control PWB
.
.
25 /