Setup Guide Installation Checklist: Please cut this page out and use it as a guide when installing your printer. 1 Install the Printer Select a Location (see p. 3) Unpack (see p. 3) Check Components (see p. 4) Record the Serial No.
Page 2
OkiLAN Network User’s Guide • 6200e Print Server Information • Network Software Instructions n-Line ® C7000 Series • Managing Hard Drive • Managing Flash SIMM • Print Resolution • Problem Solving • Maintenance • Service & Support • Accessories •...
- Back: 16 inches (40 cm) - Top: 24 inches (60 cm) • Nearby power source Unpack CAUTION! The printer weighs 106 pounds. Use more than one person to lift the printer. Use appropriate lifting techniques. □ Remove the hand holds.
Page 4
Check Components CAUTION! The printer weighs 106 pounds. Use more than one person to lift the printer. Use appropriate lifting techniques. Printer Record the Serial Number □ Before proceeding, locate the silver ratings plate on the back of the printer. Record the serial number you find there on the last page of the Handy Reference.
(3) from the end of the fuser, then push the lever (2) toward the back of the printer. Cyan Magenta Yellow Black □ Place the drums back in the printer, being careful to match them to the correct color position.
(2) on the right. Lower the left end of the cartridge into the image drum closest to the front of the printer, so that the tube (1) on the drum slides into the port (2) on the toner cartridge.
530 sheets 20-lb. paper) and load it. Keep it below the “PAPER FULL” mark. □ Turn the printer on and wait for it to warm up. power socket. The display will read □ Print out the Demo page: a Press Menu repeatedly until appears.
RAM, Microsoft Internet Explorer 4.0 or higher. You can either view the Network User’s Guide from the CD or install it on your computer: □ Insert the OKI C7000/C9000 Series CD in the CD-ROM drive. □ Click Start ® Run, then browse to the main directory on the CD and double-click install.exe.
- Printer alert monitoring in IP and IPX - Web-based configuration utility OkiView32 Utility Network printer management tool. OkiView32 lets you - Discover OKI and non-OKI print servers on your network - View the status of network printers - View and modify OkiLAN settings...
Use Unix utilities LAN Manager or LAN Server Use OkiNet Utilities (see “LAN Manager/LAN Server” in the on-line OkiLAN 6200e Network User’s Guide) Use OkiNet Connect to print directly to a network printer from a Windows workstation (see page 13).
Install the OkiNet Software 1. With all applications closed and the OKI C Series CD in your CD-ROM drive, click Start ® Run. 2. Browse to your CD-ROM drive, then double-click install.exe in the root directory.
See page 16 for details on how to do this. 1. Click Start ® Settings ® Printers. 2. Right click the OKI C7200 or C7400 printer icon, then click Properties. 3. Click the Ports tab (Windows 2000/NT 4.0) or Details tab (Windows Me/98/95).
Computers Clients with Windows 2000 & Windows NT 4.0: Push Installation □ Copy the driver files from the C7000/C9000 CD (\Drivers\Nt40 or Win2K\English\Pcldrv or Psdrv) to the network directory of your choice. □ At the host computer, open Network Neighborhood, then double-click the client computer on which you wish to install the drivers.
• Windows Me • Windows 98 USB Port Connection No USB interface cable is supplied with the printer. Use a USB cable that is compatible with USB specification 1.1. Notes: • A USB interface will only operate using Windows 2000, Windows Me and Windows 98. It will not operate using MS-DOS, Windows 95, 3.1, or NT 4.0.
□ Turn the printer on. “Unknown Device” appears. □ Click Next. □ Insert the OKI C Series CD into the CD-ROM drive. □ Select Search for the best driver for your device (recommended), then click Next. □ Select CD-ROM drive.
□ Turn the computer on and wait for it to boot up. □ Turn the printer on and make sure that all software applications are closed. □ With the OKI C Series CD in your CD-ROM drive, click Start ® Run. □ Browse to your CD-ROM drive and double-click install.exe in the root directory, then click OK.
□ Turn the printer on, then turn the computer on. □ Place the CD supplied with the printer in the CD-ROM drive, then double-click the OKI CD icon that appears on the desktop. □ Open the MAC folder and double-click the Mac Installer icon, then click Continue.
Page 18
In order to open the on-line manuals, you must have your Macintosh set to run .htm extension files under your browser. □ Create folders in which to store the C7000 Series User’s Guide and the OkiLAN 6200e Print Server User’s Guide.
Page 19
□ Turn the printer on, then turn the computer on. □ Place the CD supplied with the printer in the CD-ROM drive. □ Double-click the OKI CD icon that appears on the desktop. □ Open the MAC folder. □ Double-click the Mac Installer icon, then click Continue.
Page 20
In order to open the on-line manuals, you must have your Macintosh set to run .htm extension files under your browser. □ Create folders in which to store the C7000 Series User’s Guide and the OkiLAN 6200e Print Server User’s Guide.
• when image drums are replaced • if you switch to a significantly different print media (e.g., from white to media of various colors) • if the printer is moved to a new location Setting the Color Balance 1. Press MENU repeatedly until COLOR MENU displays.
If you consistently use another type of media in Tray 1 or the Multi-Purpose (MP) Tray, change the media settings in the printer menu (see page 25). If you do not, the print quality will be reduced and you could damage the printer.
LABEL1 (Heavy) or LABEL2 (Ultra Heavy) Changing the Default Settings If you consistently use labels in the MP Tray, enter the printer menu (see page 25) and change the settings as indicated below. Printer Menu Settings: Labels in MP Tray •...
Changing the Default Settings If you consistently use thick paper in Tray 1 or the MP Tray, enter the printer menu (see page 25) and change the settings for the paper path you are using for the thick paper as indicated below.
An Asterisk (*) appears next to the new setting. □ Press ON LINE to save the setting and exit the menu. Changing Media Settings for MP Tray in the Printer Menu First, Set Media Size □ Press MENU repeatedly until on the display.
The printer is set at the factory to automatically detect the emulation of an incoming print job. To change it to always be PCL or Adobe PostScript, see “Setting the Emulation” under Control Panel, Walk-up Functions in the on-line C7000 Series User’s Guide. MAINTENANCE POWER SAVE Display Language If you wish to choose a display language other than English, see “Setting the Control Panel Display...
Print a Sample File □ Open a file in your software application. □ Click File ® Print. □ In the Print dialog box, select the appropriate OKI C Series printer driver, then click OK. Install the Handy Reference □ Remove the backing from the Velcro back of the Handy Reference and apply the Handy Reference to either side of the printer, at the front.