Table of Contents
Advertisement
is enabled in the driver settings. When printing from other systems, this function is enabled
in the Print Menu. (See
M
ULTI PURPOSE TRAY
The multi purpose tray can handle the same sizes as the cassette trays but in weights up
to 250
. For very heavy paper stock use the face up (rear) paper stacker. This ensures
g/m²
that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths from
127.0mm to 1321mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and
128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes. Up to 10 envelopes can be loaded at
one time, subject to a maximum stacking depth of 10mm.
F
ACE DOWN STACKER
C610: The face down stacker on the top of the printer can hold up to 250 sheets of
80g/m² standard paper, and can handle paper stocks up to 188g/m².
C711: The face down stacker on the top of the printer can hold up to 350 sheets of
80g/m² standard paper, and can handle paper stocks up to 188g/m².
Pages printed in reading order (page 1 first) will be sorted in reading order (last page on
top, facing down).
F
ACE UP STACKER
The face up stacker at the rear of the printer should be opened and the tray extension
pulled out when required for use. In this condition paper will exit via this path, regardless
of driver settings.
The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle
stocks up to 250
/m².
g
Always use this stacker and the multi purpose feeder for paper stocks heavier than
188g/m².
D
UPLEX UNIT
This option provides automatic two-sided printing on the same range of paper sizes as
tray 2 (i.e. all cassette sizes except A6), using paper stocks from:
>
C610: 64 - 120g/m²
>
C711: 64 - 220g/m²
NOTE:
The duplex unit comes as standard with dn models.
"Menu functions" on page
Paper recommendations > 15
21.)
Advertisement
Table of Contents
