Ricoh A-C2 Service Manual page 69

KEY COUNTER INSTALLATION
[A]
A683I002.WMF
7. Connect the key counter connector [A] to CN211 on the I/O board.
8. Reinstall the covers [B] and [C].
9. Attach the double-sided tape to the key counter bracket.
10. Peel off the backing of the double-sided tape and attach the key counter
assembly [D] to the left side of the scanner unit.
NOTE: When attaching the key counter assembly, press the assembly hard
against the scanner cover. Otherwise, the key counter assembly may
come off easily.
11. Set SP5-401-2 to 1. (This enables the restricted access control function.)
NOTE: The key counter function is available for other modes by changing the
following SP modes.
• SP5-401-12 (Copy Server mode)
• SP5-401-22 (Fax mode)
• SP5-401-32 (Scanner mode)
• SP5-401-42 (Printer mode)
[B]
[D]
1-52
26 January, 2001
[C]
A683I003.WMF
A683I965.WMF