Table of Contents
Advertisement
SERVICE PROGRAM MODE
SP1
Mode Number
1105*
8*
Roller Ends: By-Pass
(Thick Paper Feed)
9*
Re-load Temp. Minus:
Roller Center (Thick
Paper)
10*
Re-load Temp. Minus:
Roller Ends (Thick Paper)
1106
Fusing Temperature
Display
1
Roller Center
2
Roller Ends
1109*
Fusing Nip Band Check
1111*
Paper Reverse Timing
(Duplex)
Function and [Setting]
Forces paper feed to wait until the fusing unit has
reached the specified temperature.
Feed temp. = Spec. temp. for thick paper – SP
value
Feed begins when the hot roller reaches the
specified temperature.
o
o
o
[0
C ~ 60
C / 0
C (B004/B007: 5
Displays the fusing temperature for the center or
ends of the hot roller.
This machine has two fusing lamps inside the hot
roller: one lamp heats the center of the roller, the
other lamp heats both ends.
Checks the fusing nip band. (☛ 5.1.7)
[0=Off, 1=On]
Adjusts the timing for stopping the rotation of the
reverse roller after the trailing edge of the paper
passes the duplex entrance
[+5 ~ –5 / 0 mm / 1 mm step]
Adjust the timing if paper frequently jams at the
inverter gate in the duplex unit.
5-6
19 January, 2001
o
o
C / 1
C step]
sensor.
- Quick Links:
- Initialize Td Sensor and Developer
Hide quick links:
Advertisement
Table of Contents
