Updating The Current Media Inventory; Releasing And Replacing The Magazines; Operations: Move Media Page; Operations: Inventory Page - HP StorageWorks 1/8 User's And Service Manual

Figure 47 Operations: Move Media page
.
To move a tape, select the source and destination and then click the Move button in the center of the
screen to start the move.

Updating the current media inventory

Use the

Operations: Inventory page

Figure 48 Operations: Inventory page
.

Releasing and replacing the magazines

Use the Operations: Magazine page
Release, the device will unlock the magazine and display Left Magazine Unlocked or Right Magazine
Unlocked on the OCP screen. If you do not remove the magazine within a few seconds, the device
will lock it. When you replace the magazine, the device will inventory the magazine's tape cartridges.
to have the device re-scan the tapes to update the media inventory.
to release the left, right, or both magazines. When you click
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 75