Rebooting The Autoloader (Operations> Reboot Autoloader); Enabling Password Locks (Operations > Enable Autoldr Password Locks); Support - HP StorageWorks 1/8 User's And Service Manual

G2 tape autoloader
Hide thumbs Also See for StorageWorks 1/8:
Table of Contents

Advertisement

NOTE:
This command is only needed if the inventory in the device is different than the inventory displayed
on the front panel, which would not happen under normal conditions.
Rebooting the Autoloader (Operations> Reboot Autoloader)
This option reboots the device and forces a new cartridge inventory, clearing any current error
condition.
CAUTION:
This option interrupts the current backup or restore operation and causes the operation to fail. Use
this option if the device is in an error state.
To reboot:
1.
From the Home screen, press Previous or Next until the screen displays Operations. Press Enter
to select.
2.
Press Previous or Next until the screen displays Reboot Autoloader. Press Enter to select.
3.
The Ready LED blinks during the reboot operation.
Enabling password locks (Operations > Enable Autoldr Password Locks)
This option locks the restricted areas. This is typically used if you do not want to wait for the time out
to reset the locks. Power cycling or rebooting the device also resets the locks.
To enable the password locks:
1.
From the Home screen, press Previous or Next until the screen displays Operations. Press Enter
to select.
2.
Press Previous or Next until the screen displays Enable Autoldr Password Locks. Press Enter to
select.

Support

The Support menu provides access to the following support options:
Powering a drive on or off (Support > Power On/Off
Running the demonstration (Support > Run
Running the slot to slot test (Support > Run Slot To Slot
Running the wellness test (Support > Run Wellness
Upgrading firmware (Support > Autoloader FW Upgrade, Support > Drive FW Up-
grade)" on page 103
Viewing logs (Support > Autoloader Error
Downloading a support ticket (Support > Download Support
Forcing the drive to eject a tape (Support > Force Drive To Eject
To access the Support menu:
100
Operating the Tape Autoloader
Drive)" on page 101
Demo)" on page 101
Test)" on page 101
Test)" on page 102
Log)" on page 104
Ticket)" on page 105
Tape)" on page 105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdx 18

Table of Contents