HP StorageWorks 1/8 User's And Service Manual page 146

Sub-code Description
93
Error during rotation
5
94
Sled movement to home sensor position failed
5
95
Sled movement to transport position failed
99 Error during rotation movement to rotation minimum position
A0 Movement to mailslot failed
5
A1
Sled movement to sensor failed
5
A2
Sled movement to rotation
3
A3
Elevator
A4
Error during rotation
5
A5
Sled movement to mailslot position failed
A6 Error during elevator movement to position
A7 Error during mailslot detection
B0 EEPROM on robotics controller not accessible or error during read/write operation
Save/restore configuration settings: not enough internal memory available for creating the
B1
file and restoring the file respectively
B2 Save/restore configuration settings: restore buffer corrupted, checksum calculation failed
B3 Save/restore configuration settings: database field corrupted
B4 Save/restore configuration settings: invalid personality
B5 Save/restore configuration settings: invalid file
C0 Check on magazine type failed
4
C1
Rotation
3
C2
Elevator
5
C3
Sled movement during check on magazine type failed
5
C4
Sled movement to sensor during check on magazine type failed
1
Gripper: The part of the robotics assembly that pinches media in order to grip it.
2
Slider: The part of the robotics assembly that plunges in and out for get and put operations.
146 Troubleshooting
4
to home or far position
4
position failed
movement to home position failed
4
to far position
movement during check on magazine type failed
movement during check on magazine type failed