Storing The Maytag Neptune ® Super Stack Tm - Maytag Neptune SL-3 Use And Care Manual

M
S S
TORING THE
Washers can be damaged if water is not removed from
hoses and internal components before storage. Prepare
the washer for storage as follows:
1. Select the setting on the REGULAR cycle of the
L
clothes washer and press the START/STOP
button. After one minute of filling, stop the washer
and open the door. Mix one cup of bleach OR
vinegar with four cups of water and pour the
solution into the tub. Close the door, press the
START/STOP button and allow the washer to
complete a cycle.
2. Turn the water faucets off and disconnect the inlet
hoses.
NOTES:
• Do not mix bleach and vinegar in the same wash.
Hazardous fumes can form.
• Do not pour undiluted liquid chlorine bleach directly
into washer. Doing so may cause damage to washer
tub.
N
AYTAG EPTUNE
® S S
UPER TACK
3. Advance the cycle control knob to SPIN and lower the
drain hose to eliminate any water that may be in the
drain hose.
4. Disconnect the clothes washer from the electrical
supply and leave the washer door open to let air
circulate inside the tumbler.
5. Clean the dryer tumbler with an all purpose cleaner
such as Fantastik
from the power supply.
For information on long-term storage or storage of your
Super Stack
TM
call Maytag Customer Assistance toll-free at
1-800-688-9900 USA or 1-800-688-2002 Canada.
U.S. customers using TTY for deaf, hearing impaired or
speech impaired, call 1-800-688-2080.
18
TM
or Formula 409 *, then disconnect
® ®
during extreme cold temperatures,