NordicTrack STRENGTH CIRCUIT TRAINER User Manual page 10

16. Wrap the Medium Cable (30) under a 3 1/2"
Pulley (27). Attach a 6.35mm Spacer (60) and the
Pulley to the Hack Squat Base (1) with the M10 x
78mm Button Head Bolt (41) and an M10 Nylon
Locknut (51).
17. Wrap the Medium Cable (30) under a 3 1/2"
Pulley (27). Attach the Pulley to the indicated
bracket on the Hack Squat Base (1) with an M10 x
46mm Button Head Bolt (40) and an M10 Nylon
Locknut (51).
Attach the Medium Cable (30) to the bottom of
the Counterweight (10). Tighten the Medium
Cable and Short Cable (31) into the
Counterweight until all of the slack is
removed.
18. Attach the Right Shoulder Pad (13) to the Hack
Squat Arm (9) with two M8 x 19mm Button Head
Screws (45). Repeat with the Left Shoulder Pad
(14).
19. Attach the Hack Squat Arm (9) to the Hack Squat
Backrest Frame (8) with two M10 x 70mm Button
Head Bolts (38), two 6mm Spacers (35), two M10
Washers (58), and two M10 Nylon Locknuts (51).
16
41
1
17
30
18
45
13
19
38
8
35
58
51
10
30
27
60
51
10
27
51
1
40
45
9
14
9