Advertisement
DC system voltage (VDC)
Battery recharge rate (included
batteries)
Battery Access
VOLTAGE REGULATION
Voltage regulation description
Undervoltage correction
LEDS ALARMS & SWITCHES
LED Indicators
Front panel LCD display
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
UPS Dataline suppression
UPS Dataline suppression details
EMI / RFI AC noise suppression
PHYSICAL
Installation form factors supported
with included accessories
Primary form factor
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
Installed whole system dimensions
in secondary form factor (height x
width x depth / cm)
Secondary form factor
Installed whole system dimensions
in secondary form factor (height x
width x depth / inches)
12
Less than 20 hours from 10% to 90%
Supports battery replacement via built-in access panel
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 89
Input voltages between 89 and 104 are boosted by 14%
Front panel LCD display
Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace
battery status; LCD screen rotates for rack/tower viewing
Audible alarm indicates power-failure, low-battery and overload status; alarm can be disabled using PowerAlert
software
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
480
Instantaneous
1 line TEL/DSL (1 in / 1 out); Coax jacks (2 sets)
HD-compatible 2.2GHz coaxial protection
Yes
Tower
Tower
12 x 3.5 x 6.5
30.5 x 8.9 x 16.5
8.9 x 30.5 x 16.5
Horizontal desktop placement
3.5 x 12 x 6.5
3 / 5
Advertisement
