System Connections - Panasonic WJ-MS424 Operating Instructions Manual
Quad unit
Hide thumbs
Also See for WJ-MS424:
- Operating instructions manual (67 pages) ,
- Specifications (1 page) ,
- Product catalog (125 pages)
Table of Contents
Advertisement
SYSTEM CONNECTIONS
SYSTEM 1
The input video signals for this unit are not synchronized.
VIDEO
OUT
Notes :
• When pressing the ALARM RESET/QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons, the pic-
ture on the video monitor may roll briefly at the time of switching.
• The video signal to be recorded by the VCR should be supplied from the VCR OUT connector of this unit and not from
the VIDEO OUT/ESC connector of this unit, unless VCR servo control disturbances are allowable when setting the
ALARM RESET/ QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons.
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.
• Connect the VCR OUT connector of this unit to the video input connector of the time lapse VCR for recording.
• Connect the VIDEO OUT connector of this unit to the video input connector of the video monitor.
VIDEO
VIDEO
4
3
2
1
IN
OUT
IN
OUT
IN
OUT
IN
Monitor
VIDEO
VCR
VIDEO
ALARM/REMOTE
OUT
OUT
VCR
-11-
VIDEO
WJ-MS424
SIGNAL GND
Monitor
Hide quick links:
Advertisement
Table of Contents
