Panasonic WJ-MS424 Operating Instructions Manual page 12

To erase a specific character
1. Select a character to be erased.
2. Select "•" (blank mark) to erase the character.
To erase the title of a specific channel
1. Move the cursor to the channel number whose title
is to be erased.
2. Press the SELECT buttons (– and +) simultaneous-
ly.
3-6-3. TITLE POSI
This parameter lets you select the position on the moni-
tor screen where you want the title to be displayed.
1. Move the cursor to TITLE POSI.
2. Press one of the SELECT buttons (– or +). The
TITLE POSITION menu appears with the title of the
channel 1 on the monitor screen.
3. Select the position where the title is to be displayed
by pressing the CURSOR buttons (
4. Press the ESC button to return to the previous
menu.
** TITLE SETUP **
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
1.......
Note: All channel titles will be displayed in the
same position. You cannot specify a different
position for each title.
).
4 or 5
ON
OFF
3-6-4. ALARM TITLE
This parameter lets you decide whether or not to have
the word"ALARM" displayed when the unit receives the
alarm signal.
1. Move the cursor to ALARM TITLE .
2. Select ON or OFF.
ON: "ALARM" is displayed
OFF: "ALARM" is not displayed.
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
-10-
** TITLE SETUP **
ON
ON
ALARM