Install The Assurelink Internet Gateway; Troubleshooting; Download The Smartphone App - Craftsman ASSURELINK 139.53999 Manual

Garage door opener smartphone control kit
Table of Contents

Advertisement

Available languages

Available languages

INSTALL THE ASSURELINK™ INTERNET GATEWAY
The Assurelink™ Internet Gateway allows you to control your garage door
opener from your internet connected computer or smart phone. The
Assurelink™ Control Panel has been programmed at the factory to the
Assurelink™ Internet Gateway.
1 CONNECT THE ASSURELINK™ INTERNET GATEWAY
1.1 Connect the Assurelink™ Internet Gateway to a router with the
ethernet cable. If you only have access to a Wi-Fi signal and not a
router, you must use a wireless ethernet adapter (not provided) to
connect to the internet.
1.2 Connect power to the Assurelink™ Internet Gateway. The blue and
green LEDs will blink momentarily and then the blue and green
LEDs will light solid.
2 CREATE AN ACCOUNT
From your computer, go to www.craftsman.com/assurelink and follow
the instructions to create an account. Use a computer for this step; you
cannot create an account from a mobile device.
3 REGISTER THE ASSURELINK™ INTERNET GATEWAY
Locate the serial number on the bottom of the Assurelink™ Internet
Gateway. Register the Assurelink™ Internet Gateway with the serial
number. Your garage door opener will appear in the "Places" section of
your account when registration is complete. If the garage door opener
does not appear, follow step 4 below.
4 PROGRAM THE ASSURELINK™ CONTROL PANEL TO THE
ASSURELINK™ INTERNET GATEWAY
4.1 Click on "Manage Places>Add New Device>Garage Door Opener"
and follow the directions.
4.2 Once you click ADD you have 3 minutes to press the LEARN
button two times on the control panel. The red learn LED will turn
on.
4.3 The red learn LED will turn off when programming is complete.
The blue LED on the Assurelink™ Internet Gateway will light to
indicate that a device has been programmed. Once the control
panel is programmed, it will appear on your screen and you can
then name the device (e.g., My Control Panel, etc.).
4.4 Click SAVE.
The control panel has now been programmed to the internet gateway and
the garage door can now be controlled from a computer or smartphone.
Follow the same steps to add other Assurelink™ devices.

DOWNLOAD THE SMARTPHONE APP

Visit the app store for your smartphone to download the Assurelink™
app. With the app you can monitor and control your garage door opener
and Assurelink™ devices. You can also add or remove other Assurelink™
accessories.

TROUBLESHOOTING

After power up, the LED lights will show the status of the Assurelink™
Internet Gateway.
GREEN On Solid – The Assurelink™ Internet Gateway has an IP
address and is connected to the Internet.
GREEN flashing steadily On & Off – The Assurelink™ Internet
Gateway has an IP address, but is not accessing the internet.
Check your router settings and internet connections.
GREEN Off – The router is not providing an IP address to the
Assurelink™ Internet Gateway. Check your router settings and
internet connections.
1
Ethernet
Cable
2
www.craftsman.com/assurelink
4
2
Router
Green LED
Assurelink™ Internet Gateway
3
Power
Adapter
Blue LED

Advertisement

Table of Contents
loading

Table of Contents