Radio - Kenwood KMM-100 Instruction Manual

PRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button regardless of the selected band.
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
PANDORA SRC KMM-100U
ON: Enables PANDORA in source selection. ; OFF: Disables. (
BUILTIN AUX
ON: Enables AUX in source selection. ; OFF: Disables. (
SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/

RADIO

Search for a station
Press L SRC to select TUNER.
1
2
Press repeatedly (or press
Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a station.
3
•
To store a station: Press and hold one of the number buttons (1 to 6).
•
To select a stored station: Press one of the number buttons (1 to 6) (or press one of the
number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1
Press AM– / #FM+ to select a band.
*
2
Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM) or "– – – –" (for AM) appears on the display.
3
Press the number buttons to enter a frequency.
Press ENT 38 to search for a frequency.
4
• To cancel, press .
• If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.
:
AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ AM.
*
GETTING STARTED
9)
10)
ENGLISH |
Default: XX
5