Starting The Engine - Honda EU 1000i Owner's Manual

STARTING THE ENGINE

STARTING THE ENGINE
1. Make sure that all appliances are disconnected from the AC
receptacles.
2. Turn the vent lever to the ON position.
3. To start a cold engine, move the choke lever to the CLOSED position.
To restart a warm engine, leave the choke lever in the OPEN position.
4. Turn the engine switch to the ON position.
5. Pull the starter grip lightly until resistance is felt, then pull briskly.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter or housing.
6. If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
7. If you wish to use the EcoThrottle
switch to the ON position after the engine has warmed up for 2 or 3
minutes.
32
TM
system, turn the EcoThrottle
TM