Tuner Setting; Direct Access Tuning; Itunes Tagging - Kenwood KIV-BT901 Instruction Manual

Tuner Operation
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
28
|
KIV-BT901/ KIV-701

iTunes Tagging

Using an iTunes Tagging enabled Radio Data System
station receiver you can tag your music. When you
hear a song you enjoy on your local Radio Data
System station, you only have to press the [SEARCH
MODE] button. The song's information will then be
saved on this unit. The saved songs will then show
up in a playlist called "Tagged" in iTunes the every
next time you sync your iPod to your computer. So
then you just need to click and then easily buy and
download the song you were tagging directly from
the Apple iTunes Music Store.
1
Enter iTunes tagging mode
Press the [SEARCH MODE] button.
" " will be displayed when song information
TAG
can be registered.
⁄
• Turn "ON" the "Tagging" of <Tuner Setting> (page 26)
using this function.
• Up to 50 TAGs (song's information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
• The memory usage can be checked by selecting "TAG
Memory" of <Tuner Setting> (page
when
26).