Initial Settings; Rear View Camera - Kenwood KIV-BT901 Instruction Manual

Initial Settings

You can select following Initial Setting items.
1
Select the Standby
Press the [SRC] button repeatedly also switches
source.
Select the " STANDBY" display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Initial Setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "Initial Settings".
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
"Initial Settings"
"Tuner Preset You can select a preset type.
"Type Normal": Memorizes one station for each
Type" * 1
preset button in each band (FM/ AM/ SR1 –
SR4/ XM1 – XM4).
"Type Mixed": Memorizes one station for each
preset button regardless of the selected band
(FM/ AM) and another Satellite Radio Tuner.
"Source Select" Sets the source selection method.
"1"/ "2"
"Beep" Setting the operation check sound (beep sound)
ON/OFF.
"ON"/ "OFF"
"Menu Language You can select the display language for the
Select" Menu list item.
"English"/ "Français"/ "Español"
"Pandora Source" When this is set to ON, Pandora source can be
selected.
"ON": Allows you to select the Pandora source
by connecting a Pandora-compliant iPhone.
"OFF": Disable Pandora source selection.
"Built in AUX" When this is set to ON, AUX source can be
selected.
"ON": Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
"OFF": Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
"Built in AMP" Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"ON"/ "OFF"
"AV Out Set" Changes the iPod setting from AV Output to
output-only terminal.
"ON"/ "OFF"
"R-CAM Sets a method to switch to the rear view camera
Interruption" video display.
"ON": Switches to the rear view camera video
display when engaging the shift knob of car
to "Reverse".
"OFF": Rear view camera is not used.
"R-CAM Mirror" You can flip the left and right of the rear view
camera video display. Set to "ON" and the rear
view will be displayed left and right in mirror
image on the screen.
"ON"/ "OFF"
"System F/W Updates the firmware. The update information
Update" will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
* Not selectable when KTC-HR200 (optional accessory) is
1
connected.
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Remarks
• "AV Out Set"
Outputs video and audio from the iPod source. Those from
the USB device cannot be output.
When the iPod source is switched to the Pandora source
or Internal Memory source, the output from the AV Output
terminal stops.
( : Factory setting)
43
|
English