Related Manuals for Kenwood KDC-4070RA/RG
Summary of Contents for Kenwood KDC-4070RA/RG
- Page 1 KDC-4070RA KDC-4070RG KDC-4070RV CD-RECEIVER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO © B64-1271-00 (EF)
-
Page 2: Table Of Contents
Contents Before use Safety precautions ...3 Handling Compact discs...5 Basic operations Power...6 Switching Modes ...6 Volume ...6 Menu System...7 Attenuator ...7 Loudness ...8 Tuner features Selecting Tuning Mode ...9 Tuning ...9 Local Seel Function ...9 Monaural Reception ...10 Station Preset Memory ...10 Auto Memory Entry...10 Switching Display for Tuner ...11 RDS features... -
Page 3: Safety Precautions
• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. - Page 4 • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. KDC-4070R 40W 4...
-
Page 5: Handling Compact Discs
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs •... -
Page 6: Basic Operations
Basic operations KDC-4070R LOUD SCAN ATT/LOUD LOUD indicator ATT indicator Power SRC/ Turning on the power: ¢ PWR OFF Press the SRC button. NOTE Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more. 40W 4 MENU TI VOL ADJ... -
Page 7: Menu System
Menu System To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page. -
Page 8: Loudness
Basic operations Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. -
Page 9: Selecting Tuning Mode
Selecting Tuning Mode Select which tuning mode — auto seek or manual — to use as the default. When the AUTO indicator is on, auto seek tuning is selected. When the indicator is off, manual tuning is selected. Hold down the MENU button for one second or more. "MENU"... -
Page 10: Monaural Reception
Tuner features Monaural Reception When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the monaural reception function appears in the display. -
Page 11: Switching Display For Tuner
Switching Display for Tuner Switching the Display: Each time you press the CLK button, the display switches between the Programme service name (during RDS station reception)/frequency and clock. RDS features KDC-4070R LOUD SCAN #1~6 PTY indicator — 11 — ¢ MENU 40W 4 MENU... -
Page 12: Rds Features Rds (Radio Data System)
RDS features RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. -
Page 13: Auto Tp Seek Function
Turning Region Restrict Function On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the Region restrict function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "REG ON"... -
Page 14: Programme Type (Pty) Function
RDS features Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. Hold down the PTY button for one second or more. The PTY indicator will turn on, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. -
Page 15: Presetting Volume For Traffic Information/News
Traffic Information Function You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Turning TI function On/Off: Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on. -
Page 16: News Bulletin Function With Pty News Timeout Setting
RDS features News Bulletin Function with PTY News Timeout Setting You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. -
Page 17: Cd Player Features
CD player features MENU KDC-4070R LOUD SCAN SCAN Track number Track time Playing CDs ¢ Playing CDs: If no CDs are inserted, insert one in the slot with the label facing up. If a CD is already inserted, press the SRC button repeatedly until the CD mode. -
Page 18: Fast Forwarding And Reversing Disc Play
CD player features Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. -
Page 19: Random Play
Random Play Play all the tracks on the current disc in random order. Press the RDM button to switch the random play function on and off. "RDM ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. -
Page 20: Other Features Audio Control Setting
Other features Audio Control Setting Adjust various parameters of sound quality. Press the AUD button to enter the control mode. Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it. -
Page 21: Adjusting Time
Press the ¢ button repeatedly until the Touch Sensor Tone function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "BEEP ON" or "BEEP OFF" in the display, indicating that the current beep setting is on or off, respectively. -
Page 22: Disabled System Indicator (Dsi)
The display and setting will change. Press the MENU button to end the menu mode. Navigation Mute Function When the KENWOOD Navigation System is connected, an interruption of the audio guide results in the temporary lowering of the audio level. -
Page 23: Accessories
Number of items 2CAUTION • If your car is not prepared for this special connection-system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all cable connections are securely made by inserting jacks until they lock completely. -
Page 24: Connecting Cables To Terminals
Connect to the terminal that is grounded when either the TEL MUTE telephone rings or during conversation. NOTE To connect the KENWOOD navigation system, consult your navigation manual. If no connections are made, do not let the cable come out from the tab. -
Page 25: Installation
2WARNING Connecting the ISO Connector (see p.24) (KDC-4070RG/4070RA only) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. - Page 26 Installation Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Accessory2 Removal tool When the lower level is removed, remove the upper two locations.
-
Page 27: Troubleshooting Guide
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. The fuse has blown. -
Page 28: Specifications
Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz Space)...87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ...0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) ...1.6 µV/75 Ω Frequency response (±3.0 dB) ...30 Hz – 15 kHz Signal to Noise ratio (MONO) ...65 dB Selectivity (DIN) (±400 kHz) ...