Gigabyte GA-H67A-D3H-B3 rev. 1.0 User Manual page 91

The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
On the Digital Output(Optical) screen
bit depth. Click OK to complete.
(Note) Enter the Digital Output(Optical)
connector on the back panel for digital audio output or enter the Digital Output screen if you use
the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
Appendix
Connects to a S/PDIF optical cable
(Note)
, click the Default Format tab and then select the sample rate and
- 90 -