Startup Screen - Gigabyte GA-H67A-D3H-B3 rev. 1.0 User Manual

2-1

Startup Screen

The following screens may appear when the computer boots.
A. The LOGO Screen (Default)
B. The POST Screen
Award Modular BIOS v6.00PG
Copyright (C) 1984-2011, Award Software, Inc.
H67A-D3H-B3 E9a
.
Motherboard Model
.
BIOS Version
.
.
<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
04/18/2011-H67-7A89VG0ZC-00
Function Keys:
<TAB>: POST SCREEN
Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system start-
up, refer to the instructions on the Full Screen LOGO Show item on page 44.
<DEL>: BIOS SETUP\Q-FLASH
Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F9>: XPRESS RECOVERY2
If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9>
key can be used for subsequent access to Xpress Recovery2 during the POST. For more information,
refer to Chapter 4, "Xpress Recovery2."
<F12>: BOOT MENU
arrow key < > or the down arrow key <
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order
vice setting as needed.
<END>: Q-FLASH
BIOS Setup - 30 -
Function Keys
Function Keys
-