Standard Cmos Features - Gigabyte GA-H67A-D3H-B3 rev. 1.0 User Manual

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
drive access mode is set to CHS.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master
Extended IDE Drive
Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
None If no SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Standard CMOS Features
Wed, Apr 20 2011
16:11:10
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
941M
950M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 41 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup