Gigabyte GA-H67A-D3H-B3 rev. 1.0 User Manual page 64

B. Updating the BIOS
Step 1:
the up or down arrow key to select Update BIOS from Drive and press <Enter>.
The Save Main BIOS to Drive
an independent SATA controller, use the <End> key during the POST to access Q-Flash.
2. Select HDD 1-0 and press <Enter>.
Flash Type/Size.................................
Enter : Run
Step 2:
the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The monitor
will display the update process.
Do not turn off or restart the system when the system is reading/updating the BIOS.
Step 3:
When the update process is complete, press any key to return to the main menu.
Flash Type/Size.................................
Enter : Run
Q-Flash Utility v2.23
MXIC 25L3206E
Keep DMI Data
HDD 1-0
Load CMOS Default
Update BIOS from Drive
Save BIOS to Drive
:Move ESC:Reset
Total size : 0 Free size : 0
Q-Flash Utility v2.23
MXIC 25L3206E
Keep DMI Data
!! Copy BIOS completed - Pass !!
Load CMOS Default
Update BIOS from Drive
Please press any key to continue
Save BIOS to Drive
:Move ESC:Reset
- 63 -
4M
Enable
<Drive>
Enable
F10:Power Off
4M
Enable
Enable
F10:Power Off
-
Unique Features