Selecting The Preferred Bgan Satellite - KVH Industries TracPhone FB150 User Manual

Selecting the preferred BGAN satellite

Overview
By default the terminal is set up to automatically find the most appropriate satellite
to connect to ("Auto" mode). However, if you are located in an area with more than
one BGAN satellite available, you can select the satellite you prefer to use when
registering on the BGAN network.
To select the preferred BGAN satellite
To select the preferred BGAN satellite, do as follows:
1. Select SETTINGS > Satellite selection from the left navigation pane.
2. Select the satellite you prefer to use.
If you select Auto (the default setting) the TracPhone FB150 system
automatically uses the most appropriate satellite.
Important
3. Click Apply.
If you have any ongoing calls or data sessions, they will be
terminated when you click Apply!
Selecting the preferred BGAN satellite
Chapter 4: Using the web interface
89