Handling Sms Messages - KVH Industries TracPhone FB150 User Manual

Handling SMS messages

Sending an SMS message
Important
To send an SMS message from the terminal, do as follows:
1. Click MESSAGES from the left navigation pane.
This page contains new incoming messages.
2. In the left navigation pane, click Write message.
3. Type in the message in the Write new message field.
If the message text is too long for one SMS, the message is sent as two or more
SMS messages. The field below the message field shows the number of SMS
messages used to send the message.
4. Type in the phone number in the Recipient field.
Remember 00 and country code (e.g. 00 45 for Denmark or 00 1 for USA).
If the terminal is not online when you attempt to send a message, the
message is moved to the Outbox instead of the Sent folder. Messages in
the Outbox are not automatically sent when the terminal goes online.
For further information on the Outbox, see the next section, Options for
messages in the Outbox.
To make sure a message has been sent, check that it has been moved to
the Sent folder.
Handling SMS messages
Chapter 4: Using the web interface
49