Searching For Your Code - Radio Shack Kameleon 4-in-1 Owner's Manual

7. Press OK once.The bottom IR segment flashes twice.
8. (Optional) If you've located a setup code that works, but it also has a
separate VCR code as listed on page 70, you'll need to program it into the
remote to access VCR controls, as follows:
a. Press VCR once.
b. Using the number keys, enter the four-digit VCR code for your device.
If performed correctly, the bottom IR segment will flash twice.
c. Press OK once. The bottom IR segment displays one long flash.
NOTE: If a VCR setup code is not listed, you can use the VCR key to program a
separate VCR or another device (see "Reassigning Device Keys" on page 22).
9. To exit programming, press
selected device menu screen.
10. For future reference, write down the working code in the below boxes:
DVD Player/VCR Code:
Brand Name: ____________________
VCR Code (if used):
Brand Name: ____________________

SEARCHING FOR YOUR CODE

If your device does not respond to the RadioShack 4-in-One Remote after
trying all codes listed for your brand, or if your brand is not listed at all, try
searching for your code.
NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the
device and insert the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
Programming A DVD Player/VCR Combo/Searching For Your Code 13
twice. The display will return to the last-
O ' M
WNER S
continued on next page...
ANUAL