Enabling The Tilt Switch - Radio Shack Kameleon 4-in-1 Owner's Manual

SETTING THE TILT SWITCH (Continued)
E T T
NABLING HE
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
2. Press above OTHER once. The Other programming screen will appear:
3. Using the number keys, enter 9 8 5. The bottom IR segment will flash
twice, confirming the Tilt Switch is enabled. The program keys will
appear again.
4. Exit programming by pressing
selected device menu screen.
CLEARING ALL CUSTOM PROGRAMMING
The RadioShack 4-in-One Remote contains a Custom Programming Reset
program.You can use it to remove all custom programming, except your
setup codes and reassigned device keys.
IMPORTANT: Executing this program will erase all custom settings for
Keymoved Keys, Volume Lock, and Favorite Channels.
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
24 Setting The Tilt Switch/Clearing All Custom Programming
4- -O
IN NE
S
ILT WITCH
R P
EMOTE OWERED
once. The display will return to the last-
B K
Y AMELEON